7
Z31980_00_03
1 About
1.1 This Manual
This manual is intended to be a reference guide for Bruker certified service engineers. It
provides detailed information about the installation, maintenance and service and overall
use of the Bruker device.
The figures shown in this manual are designed to be general and informative and may
not represent the specific Bruker model, component or software/firmware version you
are working with. Options and accessories may or may not be illustrated in each figure.
Carefully read all relevant chapters before working on the device!
This manual describes parts and procedures relevant to the device version it is delivered
with. For older hardware, please refer to the manual supplied at the time.
1.2 Policy Statement
It is the policy of Bruker to improve products as new techniques and components
become available. Bruker reserves the right to change specifications at any time.
Every effort has been made to avoid errors in text and figure presentation in this publica-
tion. In order to produce useful and appropriate documentation, we welcome your com-
ments on this publication. Support engineers are advised to regularly check with Bruker
for updated information.
Bruker is committed to providing customers with inventive, high quality products and ser-
vices that are environmentally sound.
1.3 Symbols and Conventions
Safety instructions in this manual are marked with symbols. The safety instructions are
introduced using indicative words which express the extent of the harzard.
In order to avoid accidents, personal injury or damage to property, always observe safety
instructions and proceed with care.
DANGER
This combination of symbol and signal word indicates an immediately hazardous sit-
uation which could result in death or serious injury unless avoided.
To Next Page
Loading...
Need help?
General
