Bruker Fourier 300 - Figure 6.3 Gradient Echo

72
Z31980_00_03
Installation
Figure 6.3 Gradient echo
• If this does not look like in the figure above, it could be, that the parameter sets have
not been converted to the correct BF1.
• The correct 2H pulse length. This is normally around 50us at 40 W and can be
checked by a zg experiment, where 2H is selected as the oberve nucleus. If the lock
is still running while you do this, there will be spikes in the 2H spectrum!
The command gradshim opens a new window.