97
Z31980_00_03
Configuration
Main -> minispec -> BIS Settings
The main information and setting page is found under:
Main -> minispec -> Lock
This page is divided in 4 parts:
• properties for the pulse programmer
• the current status of the lock signal
• Fine DAC search function
• Coarse DAC sweep function
The dynamic parameters (lock power, frequency, phase, loop gain etc) of the lock panel
are panel are set by the EDLOCK table. The values circled in red are base settings that
need to be set correctly for the lock to operate properly.
An explanation of the parameters and functions follows:
To Next Page
Loading...
