Icon System Manual T02985_02_03 69
MRI System Operation
5.2.3.3 Mounting the Animal Bed
Animal beds have a notch (1) located at the bottom side, which will hold the bed in the
basic holder, see Figure 5.4:
Figure 5.4: Bottom side of the mouse body animal bed.
(1) Notch for animal bed mounting on the basic animal holder
For mounting, slide the animal bed with its notch (1) into the rail (2) of the basic holder as
shown in Figure 5.5. Fix it with the fixation lever (3) from below.
Figure 5.5: Left: Notch (1) on the bottom side of the animal bed. Right: Front part of the basic animal
holder. (2) Rail for holding the animal bed notch (1); (3) Fixation for animal bed (lever from below is
not visible); (4) Tuning rod; (5) Coil fixation rod
To Next Page
Loading...
