S1 TI
TAN, T
RACER
5, and CTX
User Manual
030.0112.04.0
8 of 67
The followi
ng table, in alphabetical order, describes each component:
Indi
cates that the instrument is ready to take a measurement.
Allows dual h
and operation
as requi
red in certain countries.
Provides power to the instrument.
Keeps the bat
tery secure.
(T
RACER
5 only)
Accesse
s the collimator/filter assembly.
Source location of X-rays.
(T
RACER
5 only)
Provides
an attachment location for
a vacuu
m or
Heliu
m flush
hose.
Provide
connections
for US
B,
remote, USB flas
h drive
, and p
ower.
Powers the instrument on and off.
Prevents
the
ins
trument
from acti
vating without a sample in place.
RACER
Allows
accessories to be easily attached.
Controls the
instrument through a
pressur
e sensitive user interface.
Using a stylus is helpful.
Warns when the X-ray generato
r
is activa
ted.
RACER
windows
Both the S1
TITAN and the T
RACER
5 co
me with a clear examination window but the T
RACER
addi
tional window configurations for different applications.
The window prevents dust and dirt from entering.
The grid
reinforces the window against air pressure
durin
g the vacuum. However, during normal use, the grid
interferes with measurements of light elements.
Allows
the Helium flow to escape.
Clear window for normal use
Gridd
ed window for vacuum
No
window for He flush
The CTX uses two wi
ndow
types, each for a diff
erent
location –
etched sa
mple tray
Used wi
th liquid
hydroc
arbon applications, e.g. % S in Oil.
Note: C
ontains silicon at a measurable level.
Your Complete Source for
Testing Equipment
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
Info@BergEng.com