Bruker S1 TITAN - Page 9

S1 TI
TAN, T
RACER
5, and CTX
User Manual
030.0112.04.0
9 of 67
Accessories
The followi
ng table, in alphabetical order, describes accessories available for purchase
. For
details, s
ee the Accessories Manual, Bruker document 030.0116.
Accessory
Part #
Descript
ion
Backgroun
d Plate
4852
51
-000
Eliminate
s interference from materials behind or around
a small sa
mple and absorbs X-rays.
Barcode Reader,
Socket CHS
7Ci
200.0050
Scans a barcode and displays the alphanumeric
characters
on the instrument screen.
Benchtop S
tand, S1
TITAN
200.0
058
Provides
interlocks and stability for measuring small and
medium samples.
Benchtop S
tand,
T
RACER
5
200.0
114
Provides
interlocks and stability for measuring small and
medium sa
mples.
Camera
n/a
Photographs samples. This feature is standard with the
T
RACER
5.
Desktop
Stand, S1
TITAN
200.0
057
Provides
stability for measuring small samples.
Desktop
Stand,
T
RACER
5
200.0
093
Provides
stability for measuring small samples.
Extension
Pole
200.0
071
Allows
the instrument to measure from several feet
away fro
m a user and at ground level while user stands.
GPS, Dual
XGPS150A
160.0
074
Stores the l
ongitude, latitude, and altitude with
each
measurement.
Heliu
m Flush,
T
RACER
5 only
160.0
201
Increases lo
w energy
measur
ement accuracy by
replacin
g air from between a sample and the detector
with helium.
Printer, Hone
ywell
Interm
ec PB31
200.0
051
Prints screen
shots from an instrument.
Soil Foot
160.0138
Allows the instrument to stand alone at a right angle for
a horizont
al sample and can connect to an extension
pole.
Tripod Bracket, rail
moun
ted, T
RACER
5
only
150.0268
Attaches the new T
RACER
5 to a legacy tripod.
Tripod Ki
t, linear
and 3D
arms
200.0
072
Allows
the instrument to be firmly
mounted
and
positioned.
Tripod Ki
t, linear
arm
200.0
113
Allows
the instrument to be firmly mounted and
positioned.
Vacuu
m Pump,
T
RACER
5 only
200.0
090
Increases lo
w energy
measur
ement accuracy by
remov
ing air from between a sample and the detector.
Weld Ad
apter, S1
TITAN
150.0
140
Provides
a groove for aligning a weld bead or weld rod.
Weld Ad
apter,
T
RACER
5
150.0
259
Provides
a groove for aligning a weld bead or weld rod.
Your Complete Source for
Testing Equipment
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
Info@BergEng.com