Need help?Do you have a question about the Bruker SmartCooler BCU I and is the answer not in the manual?
General| Type | Recirculating Chiller |
|---|---|
| Fluid Type | Water or Water/Glycol Mixture |
| Refrigerant | R134a |
| Power Supply | 230 V, 50/60 Hz |
| Temperature Range | 5°C to 35°C |
| Pump Type | Centrifugal |
| Compressor Type | Hermetic |
| Dimensions (W x D x H) | 600 x 400 x 800 mm |
| Cooling Capacity at 20°C | 1.5 kW |
Bruker's policy on product improvement, specification changes, and feedback.
Explains safety symbols (DANGER, WARNING, CAUTION) and their meanings in manuals and on devices.
Defines the device's designed purpose and specifies what constitutes improper use.
Outlines owner obligations for safety, regulations, and personnel training.
States that only trained Bruker personnel can perform installation, repair, and adjustments.
Introduces residual risks and the importance of following safety instructions.
Warns about dangers from nonfunctional safety devices and their accessibility.
Details risks of electrical shock, including residual potentials and faulty earth conductors.
Warns about risks from high and strong magnetic fields, especially for implants, and specifies safe distances.
Explains symbols and warning labels in work areas and supervisor responsibilities.
States using non-approved parts invalidates warranty; advises authorized purchases.
Introduces BCU I, its cooling capabilities, and recommendation for NMR experiments.
Provides detailed specifications: dimensions, electrical data, gas supply.
Lists weight, dimensions, electrical details, and operating environment for the BCU I.
Details information on the device's rating plate: manufacturer, type, voltage, serial number.
States only authorized Bruker personnel can perform installation and repairs.
Outlines conditions for no manufacturer liability, e.g., improper use or manual non-compliance.
Manual is copyrighted, for internal use only; prohibits duplication or distribution.
Refers to warranty terms in manufacturer's Terms and Conditions.
Provides contact information for technical support and product improvement feedback.
Explains standard shipping symbols like 'Top', 'Fragile', and 'Protect Against Moisture'.
Instructs users to inspect delivery for completeness and transport damage immediately.
Describes packaging purpose and advises on handling and retaining materials.
Details recommended storage conditions: temperature, humidity, avoiding sunlight/shocks.
Lists components typically included in the BCU I package.
Provides step-by-step instructions and visual aids for safely unpacking the BCU I unit.
Explains rotary switch and LEDs for controlling and indicating BCU I operating modes.
Details meanings of Status and Remote LEDs for different states and connections.
Describes manual modes controlled by rotary switch, including cooling power settings.
Explains remote modes with BSVT, detailing cooling power based on rotary switch.
Details remote modes with BVT, covering cooling power and purging functions.
Covers safety for electrical systems, improper maintenance, and restart prevention.
Lists and illustrates available spare parts for the BCU I, e.g., fans, fuses, O-rings.
Provides steps for replacing the dust filter, emphasizing cleaning/replacement every six months.
Offers a guide to common problems, their causes, and recommended solutions for the BCU I.
Outlines procedure for returning defective units for repair, including contact and documentation.
Provides safety steps to be taken before dismantling the device, ensuring proper shutdown.
Explains EU environmental regulations for electrical equipment disposal, referencing WEEE directives.
Advises on disposal/recycling in USA and other countries, suggesting local/industry contacts.
To Next Page