Operation
32 Z33119_1_003
7.2 Status and Remote LED
Status LED Information
OFF NO power
Green flashing Cooling down / Warming up
Green ON READY, stable temperature
Red flashing WARNING, BCU I is overheating
Red ON ERROR, see Troubleshooting for details
BCU I is connected with BSVT
Remote LED Information
OFF Manual Operation Mode or NO power
Green flashing Connecting to BSVT
Green ON Connected to BSVT
Red ON ERROR, no connection
BCU I is connected with BVT
Remote LED Information
OFF Manual Operation Mode or NO power
Green flashing for 5sec Temperature control is ON, connecting to BVT
Green ON Temperature control is ON, connected to BVT, BCU I ON
Red ON NO connection or temperature control is OFF, BCU I OFF
To Next Page
Loading...
Need help?
General