Safety
Z33119_2_003 11
2.5 Signage
The following symbols and information signs can be found in the work area. They refer to
their immediate surroundings.
The identification and placement of warning labels are included in the manual. The
laboratory supervisor is responsible for ensuring that all the warning labels are maintained in
their proper place any time that the device is used.
Danger Spot
Warning indicating a danger spot in work rooms.
The warning label may be ordered using Bruker Part
Number 67470.
2.6 Spare Parts / Accessories
Loss of Guarantee
The use of non-approved spare parts will invalidate the manufacturer‘s guarantee.
Purchase spare parts and accessories from authorized dealers or directly from the
manufacturer. See Contact for manufacturer's address.
To Next Page
Loading...