Bruker SmartCooler BCU I User Manual

Transport, Packaging and Storage
24 Z33119_2_003
The white plastic cover has to be taken off,
when the BCU I will be connected to the
probe. When the transfer line is not
connected cover the connector with the white
plastic cover.
Check each time that the O-ring at the front
of the transfer line connector is clean before
it is connected to the probe.
Take the box with the supply material out.
The box contains:
• 1 Power cord
• 1 Support clamp (Z53660)

Bruker SmartCooler BCU I Specifications

General

Brand	Bruker
Model	SmartCooler BCU I
Category	Accessories
Language	English