EasyManua.ls Logo

Brullen i18 User Manual

Brullen i18
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Manual
Model: i18
SINGLE FLAVOUR | COUNTERTOP
Australian Design - German Engineering Soft Serve Ice Cream & Frozen Yoghurt Machines
(Int.) +61 2 9612 0000 (Aus) 1800 784 448 (Fax) +61 2 9602 2606
info@brüllen.com.au www.brüllen.com.au
Sales | Service | Supply | Installation | Worldwide
Countertop Machine
Question and Answer IconNeed help?

Do you have a question about the Brullen i18 and is the answer not in the manual?

Brullen i18 Specifications

General IconGeneral
Modeli18
CategoryKitchen Appliances
Voltage220-240V
Frequency50/60Hz
Power Consumption1800W
MaterialStainless Steel
ColorSilver

Summary

Operational Environment

Power Requirements

Installation Guidelines

Staff and Operators Safety & Hygiene Standards

Electric Shock Danger

Warns operators about the risk of electric shock if safety rules are not followed during operations.

Danger from High Temperatures

Alerts operators to the risk of burns and scalds if safety rules are not followed concerning high temperatures.

Warning Danger from Moving Parts

Informs operators about the presence of moving parts and the risk of injury from non-compliance with safety regulations.

General Safety Hazards

Crushing Hazard

Warns operators about the risk of crushed fingers or hands if safety rules are not followed.

General Hazard & Warnings

Covers general injury risks, warnings against data loss, and personal protection requirements.

Operator and Maintenance Roles

Maintenance Engineer Role

Stresses that maintenance and repairs must be done by a Brullen Engineer or qualified technician to avoid voiding warranty.

Equipment Testing Procedures

Testing Caution

Warns against testing without material for more than 3 minutes to prevent ice build-up and damage.

Maintenance Area Access

Control Panel Operations

Cleaning Procedures

Cleaning Before Production

Step-by-step instructions for sanitizing the equipment with a warm water solution before initial use.

Cleaning After Production

Procedures for cleaning the machine after use, including removing parts and thorough cleaning with solution.

Equipment Operations

Production Mode Operation

Details how to start the machine for production, including checking temperatures and setting overrun.

Advanced Operation Settings and Mix Preparation

Preventative Maintenance Schedule

Warranty Terms and Conditions

Further Warranty Policies

Troubleshooting Guide

Refrigeration Faults

Details common refrigeration issues, their causes, and recommended solutions for diagnosis and repair.

Product Dispensing Problems

Covers dispensing issues like freeze-ups and hardness, listing causes and solutions for correction.

Related product manuals