3. Transport and commissioning
3.1 Transport and set up
Only set up the humidifier on level, sufficiently load-bearing, moisture-resistant floors.
Ensure that the circulation of the air is guaranteed. Intake and discharge grilles must not be covered.
The distance to other objects in the vicinity must be at least 10 cm at the sides and at least 20 cm above.
For optimal function, the unit can be placed near a heat source. However, the
direct exposure to temperature
should
not
exceed 50 °C.
For water-sensitive floors, we recommend the use of a safety drip tray (item no.: 2160).
Move humidifier
Always empty the water tank before changing location.
Only lift the humidifier two at a time.
The humidifier has four castors on the bottom. To change the location of
the unit, it can be pushed or pulled.
WARNING!
NOTE! Risk of material damage due to tipping of the
humidifier!
If the humidifier is moved, there is a risk of the
cause unit or the floor.
To Next Page
Loading...
