Risk of property damage from improper filling!
– Only fill the water tank with normal tap water or
treated water with at least 300 µS (max. 30 °C, 86
°F). Never fill with distilled water.
– Fill the water tank on a fluid-resistant surface.
– Do not use flavoring substances.
– Ensure that no water is spilled and enters the
device.
– Every 3–4 weeks, completely drain residual
water from the water tank and refill water tank
again.
Incorrect filling of the water tank can cause mal-
functions of the water level indication or defects to
the device. In addition, water may leak from the
device and result in property damage.
Devices with an automatic water supply do not required
filling the water tank
Ä
Chapter 8.1 “Automatic water
supply” on page 65.
Personnel:
n
Operator
1.
Connect the power plug of the humidifier to the
power supply and switch on the humidifier.
2.
Open fill flap (Fig. 22/1).
3.
Using a watering can carefully fill the water tank
(up to 50 liters / 13.2 gallons).
4.
Close the fill flap again.
ð
The [Indication "Water level"] shows the current
fill level (max. 5 bars).
NOTICE
Fig. 22: Open fill flap
Operating the humidifier
2013-11-04Evaporation Humidifier B500 Professional38
To Next Page
Loading...
