Brune B500 Professional - Changing Menu Settings

Press the "-" area of the [Fan] rocker switch until
the last bar on the [indication "Fan speed level"] is
no longer lit.
ð
The [Automatic fan indicator] lights up and the
fan now is in automatic mode.
5.6
Changing the menu settings
The device offers the possibility, deviating from the fac-
tory settings, to make various settings according to your
own desire. The visual representation of the menu is
done via numbers in the control panel display. The
meaning of each number is shown in the table
Ä on page 41.
To change the menu setting, proceed as follows:
Personnel:
n
Operator
1.
On the remote control press the [Prog] button.
ð
The number 10 appears on the control panel
display (substitutive for the "Set signal tone"
menu).
2.
Press the [Prog]- button until the desired main
menu is accessed.
3.
Once the desired main menu lights up on the dis-
play, use the [Set] button to select the desired sub-
menu.
ð
After a few seconds the value (e.g. 00 or 01) of
the setting appears on the display.
4.
Using the [Humidity] rocker switch change the
value upwards ("+" area) or down ("-" area).
5.
Once the change has been performed, wait 10
seconds.
ð
The display read-out jumps back to the default
state (display of the actual humidity value). The
changes have been saved.
Operating the humidifier
2013-11-04Evaporation Humidifier B500 Professional40