If no further settings are performed within 10 seconds,
the read-out on the display automatically returns to the
default display mode (display of the actual humidity
value). The programming process can be aborted at
any time by pressing the [ON/OFF] button. In this case
the performed changes are lost.
The following table provides an overview of the menu
structure.
Menu overview
Main
menu
Sub
menu
Description Setting Comment Ex
work
s
10 Signal tone setting
11 Signal tone active, if
water tank empty.
00 = OFF
01 = ON
01
12 Signal tone active, if UV
lamp defective.
00 = OFF
01 = ON
Only on models with UV
technology.
01
14 Signal tone active, if fill
amount of water tank ≥
50 liters (13.2 gallons).
00 = OFF
01 = ON
Only on models with auto-
matic water supply.
01
15 Signal tone active during
missing radio signal.
00 = OFF
01 = ON
01
20 Relay setting The relay settings are only
required when connected
to a central air condi-
tioning monitoring system.
00
21 Relay active, if water
tank empty.
00 = OFF
01 = ON
00
22 Relay active, if UV lamp
defective.
00 = OFF
01 = ON
00
24 Relay active, if fill
amount of water tank ≥
50 liters (13.2 gallons).
00 = OFF
01 = ON
00
Operating the humidifier
2013-11-04 Evaporation Humidifier B500 Professional 41
To Next Page
Loading...
