3. Trim the cloth on cushion side of featherstrip along the total length of featherstrip as illustrated.
Item Description Qty.
1 Cushion 1
2 Bed Cloth 1
4. Fold the cloth down over front of rail, then using thumb and forefinger as a guide along front edge of the cushion
to keep the tapping block at rear edge of featherstrip, tap the featherstrip down flush with rail surface as shown..
Item Description Qty.
1 Rail Assembly 1
NOTE: Do not tap a featherstrip flush with only a
hammer as you can easily dent the rail surface behind
the featherstrip.
Page 16 of 24
To Next Page
Loading...
