5. Turn rail over and at corner pockets fold the cloth over the mitred edge as shown, stretching tightly and working
out any wrinkles as you staple three places in area shown.
Item Description Qty.
1 Rail 1
6. Staple three places along the rear edge of the pocket facing X, then trim off excess cloth at pocket area.
Item Description Qty.
1 Rail 1
7. If rail is an end rail, repeat previous step at other corner pocket. Then, starting at center of rails, stretch cloth tightly
over cushion and staple at bottom of rail working toward each end.
Page 17 of 24
To Next Page
Loading...
