Manual EVoBASIC v.7 70 / 80
If the equipment is working in semi-automatic mode (with the NTC
PROBE KIT ), the equipment will calculate the time necessary depending
on the volume and Temperature. The filtering time to perform super-
chlorination will be displayed on the screen.
Without a Temperature probe, super-chlorination will be carried out for
24 hours. If filtration is stopped, super-chlorination is suspended.
4.1.5.4- Calibration of the free chlorine probe
If you have a free chlorine probe, a menu will appear for you to calibrate
it.
Once the reading has stabilized and the chlorine measurement has been
taken with DPD1, adjust the PPM value provided by the DPD1
measurement.
4.1.6- pH menu
With this menu, you can adjust the parameters related to the pH
adjustment of your swimming pool. It only appears in EVO series
equipment.
4.1.6.1- Main screen
The reading of the pH probe can be seen in the 3rd line of the main
screen.
To Next Page
Loading...