Manual EVO v.3 83 / 142
4.2.7.2- Programme (1/24h)
This allows one single programming a day from 0h to 23.59.
4.2.7.3- Programme (2/24h)
This allows two individual programmings a day
4.2.7.4- Programme OFF
This cancels and details the programmings carried out.
4.2.8- Clock
The equipment has a time clock, which will be taken as the reference when
programming times of the auxiliary relay. The clock keeps the time setting even
when the equipment is without supply.
4.3- Warning and alarm messages (BSsalt)
In the event of an abnormal situation in the operation of the equipment, it will
inform you through an alarm (the equipment cannot operate under these
conditions and gives an acoustic and visual alarm) or a warning (the
equipment cannot continue operating and corrective action is required)
Messages will be displayed through LEDs as indicated in the following figure:
To Next Page
Loading...