Lullaby
The Baby unit plays lullabies to gently soothe your baby back to
sleep. Each lullaby is played repeatedly for 15 minutes. Select
one of the three melodies or select Play All for a medley of all 3
lullabies for 15 minutes. The Lullaby LEDs indicate which lullaby
is playing or if all 3 are being played.
Playing a lullaby
At the Baby unit:
1. Press . The Lullaby 1 LED is switched on. Press again
to select Lullaby 2, Lullaby 3 or all three lullabies.
2. Press to start playing the Lullabies.
3. Press at the Baby unit OR at the Parent unit to stop.
At the Parent unit:
1. Press . Lullabies at the Baby unit will start to play.
2. Press or to select between lullabies, or all 3
lullabies. Lullaby selection is indicated on the Parent unit
lullaby selection LEDs.
3. To stop the lullaby, press .
19Using your BT Baby Monitor 100
While a lullaby is playing you can still
access any of the other functions.
The lullaby may stop part way through
playback. This is normal because
playback stops after 15 minutes.
The volume of the lullaby can only
be controlled by the Baby unit volume
and buttons.
If you experience any problems, please call the Helpline on 0808 100 6554*
To Next Page
Loading...
