21
If you experience any problems, please call the Helpline on 0808 100 6554*
Link light is red
• The link between your Units is broken. You will also hear an alert on the Parent unit to let you
know there is no communication between the Units. If this happens, check that the mains power
(or batteries) is correctly connected and that the Units are within range of one another.
Battery low on Parent unit
• Put the Parent unit back on the charger to charge.
• Place Parent unit back on the charger as frequently as possible or ideally leave it on the charger to
ensure the batteries remain charged.
• To shorten the charging time you can turn the Parent unit off if it is not being used while it is
charging.
Parent unit remains silent or very quiet
• The sensitivity setting may be too low, see page 17.
• You may have set the volume too low, see page 15.
You can hear a high pitched noise
• The Units are too close to each other, or the volume setting is too high.
Talk Back feature is not working
• Check that the volume is loud enough at the Baby unit, see page 15.
Help
To Next Page
Loading...
