BT 2000 Quick Setup And User Guide

If you need some help, call us on 0800 145 6789* or go to www.bt.com/producthelp
17
When you make a call, the
green In use light on the
base comes on.
Auto end
If auto end is set to On you
can end a call by placing the
handset back in the base.
If auto end is set to Off, you’ll
need to press
to end the call.
Auto end On is the default
setting. See page 38.
To switch the handset off
1. Press and hold until the handset turns off.
To switch the handset on
1. Press and hold until the handset turns on.
Make an external call
1. Press .
2. When you hear the dial tone, enter the number.
Preparatory dialling
1. Enter the number first. If you make a mistake select
Del. by pressing the Right option button to
delete the last digit.
2. Press to dial.
End a call
1. Press
.
Using the phone
Call timer
Your handset will automatically
time your outgoing and
incoming calls. The handset
shows the length of time both
during and for a few seconds
after your call.

BT 2000 Specifications

General

Type	Cordless Telephone
Answering Machine	Yes
Caller ID	Yes
Phonebook Capacity	50
Number of Handsets	1
Range Indoor	50 meters
Range Outdoor	300m