BT 2000 Quick Setup And User Guide

Settings
If you need some help, call us on 0800 145 6789* or go to www.bt.com/producthelp
36
There are two handset tones:
keypad tones and confirmation
tones. You can turn these on or
off, the default setting is On.
Keypad tones: when turned on,
you will hear a beep after each
button press.
Confirmation tones: when
turned on, you will hear a tone
after each successful action
or after an error has occurred.
This does not include the
battery charging tone when the
handset is placed on the base/
charger, low battery or out of
range warnings or tones used in
calls such as Call Waiting or Call
Intercept.
4. The current external ringtone will play at the
current volume. Use the or button to increase
or decrease the volume, or turn the ringer off.
You will see the volume level change on the display
or
Ringer Off will be displayed if you turn the
ringer off.
5. Press to save your choice. Saved will be
displayed and you will hear a confirmation tone.
Turn the handset tones on or off
1. Select Menu , scroll to Settings and press .
2. Sounds is displayed, press . Press until
Handset Tones is displayed and press .
3. Keypad Tones is displayed, press or press
to display Confirmation Tones and then press .
4. Press or to select On or Off then press
to save. Saved will be displayed and you will hear a
confirmation tone (if set to on).

BT 2000 Specifications

General

Type	Cordless Telephone
Answering Machine	Yes
Caller ID	Yes
Phonebook Capacity	50
Number of Handsets	1
Range Indoor	50 meters
Range Outdoor	300m