BT 2000 Quick Setup And User Guide

If you need some help, call us on 0800 145 6789* or go to www.bt.com/producthelp
43
If you have subscribed to a
Caller Display service the time
and month will be set when you
receive your first call but you
will still need to set the year.
Clock/Alarm
The default setting is 12 hour.
You must enter the full date:
day, month and year.
Use
if you need to move the
cursor left and to move the
cursor right.
The time is set in 24 hour format.
If you didn’t set the time and date when you first
set-up your phone then you will need to do so
before you can set an alarm. The clock will also be
displayed on the handset screen in idle mode.
Set the time format (12 or 24 hour)
1. Select Menu , scroll to Clock/Alarm and
press
.
2. Alarm is displayed, press until Time Format is
displayed and press
.
3. Press or to display 12 hour or 24 hour then
press
to save your choice. Saved will be
displayed and you will hear a confirmation tone.
Set the time and date
1. Select Menu , scroll to Clock/Alarm and
press
.
2. Alarm is displayed, press until Time and Date is
displayed and press
.
3. Enter the time using the keypad and press .
4. Enter the date using the keypad and press .
Saved will be displayed and you will hear a
confirmation tone.

BT 2000 Specifications

General

Type	Cordless Telephone
Answering Machine	Yes
Caller ID	Yes
Phonebook Capacity	50
Number of Handsets	1
Range Indoor	50 meters
Range Outdoor	300m