BT 2000 Quick Setup And User Guide

If you need some help, call us on 0800 145 6789* or go to www.bt.com/producthelp
Settings 39
Set the base ringer volume
1. Select Menu , scroll to Settings and press .
2. Sounds is displayed, press until Base Settings
is displayed and press
.
3. Ringing is displayed, press . Press to
display Ringing Volume , then press .
4. The current base ringtone will play at the current
volume. Use the or button to increase or
decrease the volume, or turn the ringer off. You will
see the volume level change on the display or
Ringer
Off will be displayed if you turn the ringer off.
5. Press to save your choice. Saved will be
displayed and you will hear a confirmation tone.
Set a PBX access code
1. Select Menu , scroll to Settings and press .
2. Sounds is displayed, press until Base Settings is
displayed and press
.
3. Press to display PBX Code and press .
4. Enter the number you want (maximum of 4 digits)
and press to save. Saved will be displayed
and you will hear a confirmation tone.
There are 5 base ringer volume
levels plus Ringer Off. The
default setting is Level 3.
If you’re connected to a
switchboard, you might
need to enter an access code
(e.g.9) before each number
is dialled. Your BT2000 can
store an access code which is
automatically dialled before
each number.
If you wish to revert to not
using a PBX access code, you
need to go into the PBX code
menu and delete all the digits
by selecting
Del. , then press
to save.

BT 2000 Specifications

General

Type	Cordless Telephone
Answering Machine	Yes
Caller ID	Yes
Phonebook Capacity	50
Number of Handsets	1
Range Indoor	50 meters
Range Outdoor	300m