BT 8600 - Change blocking modes; Customize call blocking settings

22 BT Call Blocking
How do I change the dierent BT Call Blocking modes?
You can change the default setting of Announce mode to International, Answer phone or Custom:
1. In idle mode, press
.
2. Follow the instructions to set your PIN or enter your PIN and select OK.
3. BT Call Blocking is highlighted, press Select or
.
4. Block settings is highlighted, press Select or
.
5. Scroll
to Blocking mode and then use the or to select the one that you want to change
(e.g. International) and press Save.
Custom mode
Once you get used to your phone, you might decide to customise your settings depending on the
call type. For example, you can allow unknown numbers but block international numbers and send
withheld numbers to the answer phone.
Remember: settings will be the same as the last mode you selected, unless you save your own custom options.
Here’s how to customise settings for certain types of call
Takecarewhendoingthis,asitchangesyourphone’sBTCallBlockingsettings.
1. In idle mode, press
.
2. Follow the instructions to set your PIN or enter your PIN and select
.
3. BT Call Blocking is highlighted, press Select or
.
4. Block settings is highlighted, press Select or
.
5. Scroll
to Blocking mode then press or tondCustom.
6. Press Saveandscrolltondthetypeofcallthatyouwanttowanttochangethesettingsfor.Youcan
change : Blocked numbers / Allowed numbers / International / Withheld / Payphones / Mobile numbers /
Unavailable /All other numbers. And for each of these, you have the choice to: Block / Ans.phone /
Allow / Announce.
7. Select Save.