BT 8600 - Answer machine message playback

34 Using the phone
3. Press
or to display the alarm frequency you want: O, On once, On daily, Mon to Fri or Sat & Sun
then press
and enter the alarm time, (you will also need to select AM or PM if you have set 12
hour format), then press
to select the melody you want. Select Save.
To stop the alarm, press
or select Stop.
To activate a ten minute snooze, select Snooze or any other button (except
or Stop). You can set
snooze as many times as you want until you select Stop.
Ifanincomingcallisreceivedwhilethealarmisgoingo,thealarmnoticationwillimmediatelystop
and the incoming call will be shown on the display. The alarm will not resume.
Answer machine
Message playback using the handset
1. Highlight the answer phone icon on the idle screen and press
, or
i. Select Menu, Answer Phone is displayed, press Select.
ii. View Messages will be displayed, press Select.
2. A list of your answer phone messages will be displayed with the most recently
received highlighted at the top.
3. Use
or to scroll through the list to highlight the message you wish
to listen to and press
.
i. If you have more than one message stored and want to listen to them all, select
Options. Play all will be highlighted, press Select.
4. As each message is played, the handset will display the number or the name if
you have Caller Display and a name/number match and the time and date it was
received. If you have any old (already listened to) messages these will be played
after your new messages.
Gordon
6.30pm Sun
---End---
Messages
Select Back
8:00pm
Menu Calls
Lounge
ANS
1 11