31Using the phone
Speed dial
You can allocate a name and number to each of the Speed dial buttons to
WX
YZ
. Button is
pre-programmed with 1571 but you can delete this and replace it with an entry of your choice.
Save a Speed dial entry
1. From the idle screen, enter the telephone number you want to store.
2. Then, either: Press and hold the Speed dial button from
to
W
YZ
that you want to store the number under.
Or, Select Options, scroll
to highlight Set speed dial and press Select. Scroll to the speed
dial location number you want (1-9) and select Save.
The display will show Saved as speed dial x (x being the Speed dial button).
Dial a Speed dial entry
1. Either, press and hold the Speed dial button
to
WX
YZ
under which the entry you want to dial is stored.
Or, Select Menu, scroll
to display Speed Dial List and press Select.
Scroll
to highlight the entry you want then press . The number will be dialled automatically.
Edit a Speed dial entry
1. Select Menu, scroll
to display Speed Dial List and press Select.
2. Press
or to highlight the entry you want to edit and select Options.
3. Edit is highlighted, press Select.
4. Edit the number by selecting Clear to delete digits and then enter any new digits. Select Save. Saved as
speed dial x will be displayed.
Delete a Speed dial entry
1. Select Menu, scroll
to display Speed Dial List and press Select.
2. Press
or to highlight the entry you want to delete and select Options.
3. Scroll
to highlight Delete and press Select.
4. Delete speed dial x? is displayed, select Yes. Speed dial x deleted will be displayed.
Remember: numbers that you store in speed dial are allowed straight through, without Call Blocking
intercepting them.
To Next Page
Loading...
