BT 8600 - Enable;disable remote access

38 Using the phone
5. Enter your old 4 digit PIN and select OK.
6. Enter the new 4 digit PIN, select OK, then enter the new PIN again and select OK. The display will show
New Access PIN saved.
Turn remote access on or o
YoucannotturnRemoteaccessOnuntilyouhavesetaremoteaccessPIN.ThedefaultsettingisO.
1. Select Menu, Answer Phone is displayed, press Select.
2. Press
until Settings is displayed, press Select.
3. Press
to highlight Remote access and press Select.
4. On/O is displayed, press Select.
5. Press
or to display On or O and select Save. Saved will be displayed.
If you forget to switch on your answer machine
RemoteAccessmustrstbeenabledtoallowyoutoswitchontheanswermachineremotely.
1. Call your number from another phone and let it ring. After 20 rings the machine will switch on and
answer your call.
2. Press
*
and enter your 4 digit remote access PIN when prompted. You can play back your messages.
IfyoudonotchoosetoswitchyouranswermachineOn,itwillswitchowhenthecallisended.
BT Calling Features
YouneedtosubscribetothespecicBTCallingFeaturetobeabletousesomeoftheseservices.You
mighthavetopayafee.FormoredetailsonBT’sCallingFeatures,gotobt.com/callingfeatures, refer
to the user guide supplied when you subscribed to the services of your choice or call BT free on 0800
800150.Ifyou’renotconnectedtotheBTnetwork,someofthesefeaturesmaynotbeavailable.
To change any BT Calling Features settings
1. Firstly, select Menu, scroll
to display Calling Features and press Select. Then choose the Calling
Feature you want from the options opposite: