BT 8600 - Activate the batteries; Charge the handset

If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
9
Quick set up guide
2 Activate the
batteries
1. Activate the batteries by pulling the plastic tab
away from the bottom of the handset. Remove
the protective plastic from the screen.
2. The BT logo will appear on the screen, followed
by the set up wizard screen displaying Please
set the time and date to start using your
telephone. Place your handset on the base
tochargerst.
Set up
OK
Please set the
time and date
to start using your
telephone
3 Charge
Place the handset on the base and leave
to charge for 24 hours.
Important
Charge the
handset
batteries for
24 hours or your phone
might not work.
If your screen displays
thismessage,don’tworry.
This is normal and will
continue to be displayed
until you connect the
phone line cord in Step 4.
Hide
Line cord error.
Please check.
Set up
OK
Please set the
time and date
to start using
your telephone