BT BT3440 - Additional Handsets and Battery Performance

Quick set-up guide
6
Set up for additional handsets
(multipacks only)
1. Plug the mains power adaptor
into the mains wall socket and
switch on the power.
2. Activate the batteries as
explained on page 5.
3. Place the handset on the charger
to charge for 16 hours.
Battery performance
• To keep the batteries in
the best condition, leave the
KDQGVHWRƪWKHEDVHIRUD
few hours at a time.
• Running the batteries right
down at least once a week
will help them last as long
as possible.
• After charging your handset
IRUWKHƬUVWWLPHVXEVHTXHQW
charging time for the batteries
is approximately 8 hours.
• The charge capacity of
rechargeable batteries will go
down over time, which will
reduce the talk and standby
time. Eventually they’ll need
replacing. For details on how
to get replacement batteries,
call the helpline on 0800
218 2182*.
Tip
If you need to take the batteries out,
slide the battery cover down, then
gently take the batteries out.
1