Quick set-up guide 7
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
Quick set-up guide 7
Using your BT6600
on a broadband line?
To avoid problems with your
broadband or noise on your
phone line, you might need to
plug it into the wall socket via
a microfilter (not supplied).
If your main phone
socket has a single
socket, you do need
to use microfilters,
like this:
You’ll need a microfilter for
every phone socket where
you’ve got equipment plugged
in – up to a maximum of four
per line – including alarm
sytems and digital TV boxes.
You can get BT ADSL micro
filters from bt.com/shop
You don’t need to use
microfilters if your main phone
socket has two separate
sockets, like these:
4 Set up your additional
handsets (multipacks only)
1. For additional handsets and chargers: plug the
mains power adaptor into the back of the charger
and plug the other end into the mains wall socket
and switch on the power.
2. Activate the batteries as explained on page 5. If you
set the time and date on the first handset then it
will be shared with all other handsets in your multi
pack once you activate the batteries.
3. Place the handset on the charger to charge for
24 hours.
To Next Page
Loading...
Need help?
General
