Call control settings
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
28
Please note, other products
connected to the line are not
compatible with this feature
and will still ring.
For more information and
general advice on handling
unwanted calls please go to
bt.com/unwantedcalls
You must subscribe to a Caller
Display service from your
network provider for the block
nuisance calls feature to work.
Charges may apply.
Blocked will be displayed with no
backlight on the handset when
a blocked call is received. The
handset or base will not ring.
3. Do not disturb is highlighted, press OK.
4. Press
or to select On, Off or Timed. If you
select Timed you need to select the on and off times
you want, press
and enter the on time, then
again and enter the off time. Press
to
highlight whether you want VIP calls to be Allowed
or Not Allowed using
or , then press Save. The
chosen setting will be displayed and you will hear a
confirmation tone.
Block nuisance calls
The BT7600 blocks nuisance calls in two ways,
firstly by type e.g withheld or international and also
by your choice of specific numbers (you can store
up to 10 numbers of your own choice).
1. Select Menu, scroll
to Call control and
select Options.
2. Enter the access PIN and select
. Incoming calls is
displayed, press OK.
3. Press
to highlight Block calls and press OK.
You now have 2 choices:
i) To block calls by type, when By call type is
highlighted, press OK. You can now select Blocked
or Allowed for each of the call types by highlighting
each one:
To Next Page
Loading...
Need help?
General
