If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
37
You’ll need to subscribe to
your network provider’s Caller
Display service for this feature
to work. You might have to pay
a fee. For more information on
BT Calling Features, call BT free
on 0800 800 150.
To make sure the caller’s name
is displayed, make sure you’ve
stored the full telephone
number in your contacts list,
including the dialling code.
You can store more than one
number for the same caller.
There are some incoming calls
where a number is not displayed
and a network message is
recorded instead e.g.
Unavailable = number
is unavailable
Withheld = number has
been withheld
International = international
number
Operator = call from the operator
Payphone = call from a
payphone
Ringback = a ringback call
Caller Display
If you’ve subscribed to a Caller Display service,
you’ll be able to see your caller’s number on your
handset display (provided it’s not withheld) before
you answer a call. If your caller’s name is stored
in your contacts list and it matches the number
calling, you’ll see the caller’s name and where they
are calling from (i.e. Home, Mobile or Work) on the
display instead. If you haven’t subscribed to a Caller
Display service Incoming call will be displayed when
you receive a call. If you receive a call from
a number you have stored in your Blocked calls
list Blocked will be displayed under the name
or number.
Calls list
The Calls list holds up to 50 incoming (missed and
answered) calls and 30 outgoing calls. The date
and time of the call is also stored. If you haven’t
subscribed to a Caller Display service, your calls list
will show No number, for incoming calls. The time
and date will still be recorded against this entry.
Calls are listed in chronological order with the most
recently received/made call at the top of the list.
Caller Display and the Calls list
To Next Page
Loading...
Need help?
General
