26
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Handset ringing priority
1. Press Menu, scroll
to
Settings and press OK.
2. Scroll
to
BS Settings. Press OK.
3. Scroll
to
Ring Priority. Press OK.
4.
All Handsets is highlighted. Press OK for all handsets to
ring together.
Or
Scroll
to
Select Handset. Press OK then press
or
to select the handset you want to ring rst. Press OK.
The ring delay option is highlighted. Press
or
to set
the number of rings before the other handsets ring. Press
OK.
5. Press
Back to return to the previous menu.
Recall mode
1. Press Menu, scroll
to
Settings and press OK.
2. Scroll
to
BS Settings. Press OK.
3. Scroll
to
Recall Mode. Press OK.
4. Press
or
to select Timed Break or Earth and
press
OK.
System PIN
1. Press Menu, scroll
to
Settings and press OK.
2. Scroll
to
BS Settings. Press OK.
3. Scroll
to
System PIN. Press OK.
4. Enter the old PIN (default setting 0000) and press
OK.
5. Enter the new PIN and press
OK. Re-enter the new PIN and
press
OK. Press Back to return to the previous menu level.
When you have more than one
handset registered to your base, you
can set one handset to ring before the
others. This allows one handset user
to answer all incoming calls rst, like
a receptionist.
Choose
All Handsets if you want
all handsets to ring at the same time
or
Select Handset to nominate a
handset to ring before the others.
Ring delay options; 2, 4, 6 or 8 rings.
The System PIN is used when
changing certain settings and
registration / de-registration.
The default setting is 0000.
You can change this to your
own preferred 4-digit number.
If you make a mistake, press
Clear
to delete digits.
Earth and Timed Break are settings
for switchboard use. If in doubt
please contact your switchboard
service provider.
To Next Page
Loading...
