BT DIVERSE 7110 - Base Reset and Date;Time Setup; Resetting the Base Unit to Defaults; Manual Date and Time Configuration

27
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Reset base
This resets your BT Diverse 7110 to its original settings.
1. Press
Menu, scroll
to
Settings and press OK.
2. Scroll
to
BS Settings. Press OK.
3. Scroll
to
Reset Base. Press OK.
4. Enter the system PIN (default setting = 0000) and press
OK.
5. Display shows
Reset to Default? Press OK to conrm
or
Back to cancel.
6. Press
Back to return to the previous menu level.
Date/Time/Alarm
Set date and time
Providing you have subscribed to your network’s Caller Display
service, the date and time is set automatically when you receive
your rst call.
1. Press
Menu, scroll
to
Settings and press OK.
2.
Date & Time is highlighted. Press OK.
3.
Time Format is highlighted, press OK. Press
or
to
choose
24 Hour or 12 Hour and press OK.
4. Scroll
to
Date Format and press OK. Press
or
to select
DD/MM/YYYY or MM/DD/YYYY and press OK.
5. Scroll
to
Enter Time and press OK. Enter the time using
the keypad in 24 hour mode only, e.g. 17:30 for 5.30pm.
Press
OK.
6. Scroll
to
Enter Date and press OK. Enter the date
e.g. 09 04 2010 (displayed as
09/04/2010) for 9 April 2010
and press
OK.
7. Press
Back to return to the previous menu level.