40
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Registration of an additional handset when base
PIN changed
(i.e. if PIN changed from default setting of 0000)
At the handset:
1. Press
Menu, scroll
to
Settings and press OK.
2. Scroll
to
HS Settings and press OK.
3. Scroll
or
to Register and press OK.
4. Press
or
to select the base you want (1-4). You should
only select a base that has a
* displayed beside it. Press OK.
5. Enter the 4-digit system PIN then press
OK. The display shows
Overwrite the registration on Base x? Press Yes.
At the base:
1. Press and hold
for approximately 8 seconds until it
beeps and then release. Press
OK on the handset to conrm.
The base will go into registration mode for 90 seconds and
will then beep if registration is successful. The handset will
automatically be assigned the next available handset number.
Internal calls
Call another handset
If you have more than one handset registered to the base, you can
make internal calls between two handsets.
1. Press
and if you have one other handset it will ring.
If you have other handsets, press
or
to select the
handset (1-5) you want to call, then press
OK.
To Next Page
Loading...
