BT Graphite 2500 - Answering Machine Base Controls

13
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp.com
Answering machine base
Skip
Skip
Del.
Find
Stop
Vol.
Answer
On Off
Play
Stop
Press to stop playback,
page 28.
Message indicator
Shows the number of messages.
If new messages have been received,
the number of new messages will be
displayed ashing.
If there are no new messages, the
counter will display the total number
of old messages stored.
The indicator will display:
F = if the answer machine memory
is full.
A = if the answer machine is being
accessed remotely.
= (ashing) if an incoming
message or outgoing message
is being recorded.
0 = (scrolling) if a memo is recording.
= if Answer only mode is set.
Volume Down
During playback,
decrease base
loudspeaker
volume, page 28.
In standby, press
to decrease base
screening and
playback volume.
Volume Up
During playback,
increases base
loudspeaker
volume, page 28.
In standby, press
to increase base
screening and
playback volume.
Skip back/Play outgoing message
During playback, press once to
skip back to the beginning of the
current message. Press twice or
within a second after the message
starts to go back to the previous
message.
In standby, press to play the
current outgoing message.
Skip forward
During playback, press to play
the next message, page 28.
Play
Press to play messages,
page 28.
Ans/On/Off
Switch between
answer and
record, answer
only and
answer off.
Find / Page
Press to ring
handsets
registered to the
base, page 17.
Press and hold
to register new
handsets to the
base, page 38.
Delete
During playback,
deletes the
current message.
In standby, press and
hold to delete all old
messages, page 28.
Red – battery
charging LED
indicator
Green – power is
on / line is in use