27
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp.com
You will need to set the date and
time (if you have not already done
so) so that you will know when each
message was received. If you have
subscribed to your network’s Caller
Display service, the date and time is
set automatically when you receive
your rst call. To set the date and time
manually, see page 8.
Your BT Graphite 2500 answering
machine has voice prompts to help
you use its settings and features.
Using the answering
machine
Your BT Graphite 2500 can digitally record up to 12 minutes
of messages or up to 59 messages. Each individual incoming
message can be up to 3 minutes long.
You can operate your answering machine from:
• the handset.
• the base.
• remotely, from any other Touchtone™ telephone, see page 32.
Your BT Graphite 2500 comes with two pre-recorded outgoing
messages, Answer and Record or Answer Only, alternatively you
can record your own version of each.
Using the answering machine at the base
Set the answer mode/switch on or off
1. Press
to toggle between the 3 settings: Answer and
record, Answer only or Answer off. The setting is announced.
Message counter
When the answering machine is off, the counter will be turned off.
0 Answering machine on, no messages, Answer &
record mode set
2 Answering machine on, 2 old messages are stored
2 Flashing, you have 2 new messages
9 Flashing slowly, you have more than 9 old messages
ashing quickly, you have more than 9 new messages
F Answering machine memory full
A Remote access in progress from an external line
or the handset (see page 33)
8 Recording a message or memo
(scrolling one segment at a time)
1-9 Speaker volume level, displayed when you press
Answer machine in Answer only mode
The default is set to on so it’s ready to
record messages as soon as the base
is plugged in. Make sure you charge
the handset for at least 24 hours rst
though before use.
To Next Page
Loading...
Need help?
General
