15
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp.com
Important
Storing security code information
in the phonebook may allow
other people access to your
personal details.
Chain dialling
Chain dialling is a convenient way of entering long sequences of
numbers during a telephone call. This can be when trying to dial a
phone number greater than 24 digits (the largest number that can
be stored in a single phonebook entry) or when using automated
telephone services, e.g. telephone banking.
Dial a chain number
1. Enter the rst part of the number as usual using the keypad or
from the phonebook. Press
.
2. Either enter the additional part of the number using the
keypad or press , scroll
to the phonebook entry
containing the next number sequence and press
to dial
the number.
Secrecy / Mute
You can stop your caller from hearing you while you talk to
someone else close by.
1. During a call, press
. The handset microphone is muted
and the display shows sECRECy On.
2. Press
again to resume your call.
Adjusting the earpiece/handsfree volume
You can adjust the earpiece or loudspeaker volume, 1-5.
1. During a call, press
to decrease
the volume.
Make a handsfree call
1. Dial the number then press .
2. Press
again. The icon is displayed and you hear your call
over the handset loudspeaker.
Press
to switch the call between the earpiece and
the loudspeaker.
3. Press
to end the call.
Default setting=volume level 3
Handsfree
Handsfree lets you talk to your caller
without holding the handset. It also
enables other people in the room to
listen to your conversation over the
loudspeaker.
During a handsfree call, press
To Next Page
Loading...
Need help?
General
