BT STUDIO PLUS 5100 - Display and Alarm Settings; Setting and Managing Alarms

25
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Use any key to disable the alarm when
it is activated.
Display
You can choose to display the handset name or the time in the
standby screen.
1. Press the
button to open the main menu.
2. Press
or
until the display shows hS SeTTingS
and press
.
3. Press or
until DiSPlaY is displayed, press to select.
4. Press or
to select TiMe or hanDSeT naMe, then
press
to conrm.
5. Press and hold
to return to standby.
Alarm
1. Press the
button to open the main menu.
2. Press
or
until the display shows hS SeTTingS and
press
.
3. Press
until alarM is displayed and press to select.
4. Press or
to select On or OFF and press .
5. If you select
On you should now enter the time in 24hr format,
i.e. for 07.30am enter
, and press .
The
icon will show on the standby screen to indicate that
the alarm is set.
6. Press and hold
to return to standby.
When the alarm goes off
The alarm will only go off on the handset were it has been set
(this is indicated by the
icon on the standby screen). Turn the
alarm off by pressing any handset button, even if the keylock
has previously been activated.
The alarm will sound even if the handset ringer has been set to
off. The ringer will remain set to off after the alarm has sounded.
The alarm will sound with the handset ringer melody that has
been set and the screen will show
alarM On.
If the alarm sounds during a call, you will hear a beep in
the earpiece.