8
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
BT Studio Plus 5100 multiple pack
owners only
Location
You need to place your BT Studio Plus 5100 charger close enough
to a mains power socket so that the cable will reach.
Setting up the charger
1. Plug the power adaptor cable (item code 048610) into the
underside of the charger and secure the cable behind the
retaining clip.
Plug the other end into the mains wall socket and switch the
power on.
2. Remove the protective lm from the handset screen and
activate the batteries by pulling the plastic tab away from
the back of the handset.
3. Place the handset on the charger and charge for at least
24 hours.
Your BT Studio Plus 5100 multiple pack is now
ready for use.
Mains power cable
Cable retaining clip
To Next Page
Loading...
