33
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
If registration is not successful rst
time, please repeat the process again
in case the base registration period
ran out of time.
If there are already 5 handsets
registered to the base, the
registration will fail. You must
de-register (delete) another handset
before you can register the new one.
See page 28, “Delete handset”
for instructions.
Registering additional
handsets
You can use up to ve BT Studio Plus 5100 handsets with your
BT Studio Plus 5100 base to extend your phone system without
needing to install extension sockets for each new phone.
If you have purchased a BT Studio Plus 5100 multiple pack any
additional handsets come pre-registered to the base.
If you have purchased an additional handset separately you must
register it to your BT Studio Plus 5100 base before it can be used.
Registering a handset
1. Press the button then
or
until regiSTraTiOn
is displayed, then press
.
2.
Pin? is displayed. Enter the base PIN (original setting 0000)
and press
.
3. The handset will display
Searching, press and hold the
button on the base until you hear a long beep and the green
In use light begins to ash.
4. The handset will temporarily display
regiSTereD then will
display
hanDSeT and will be automatically assigned the next
handset number.
To Next Page
Loading...
Need help?
General
