BT STUDIO PLUS 5100 - Date and Time Configuration; Setting the Date and Time

7
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Set the date and time
1. Press the
button to open the main menu.
2. Press
or
until the display shows hS SeTTingS and
press the
soft key. DaTe & TiMe is displayed, press the
soft key again.
3. Press
or
until the display shows
SeT TiMe and press
the
soft key.
4. The current time setting is displayed, enter 2 digits for the
hour and 2 for the minute using the 24hr format (eg for
10.54pm, press
) and press the soft key,
you will hear a conrmation tone.
5. Press
and
SeT DaTe is displayed. Press the soft key.
6. The current date setting is displayed, enter 2 digits for the day,
2 for the month and 2 for the year using the dd-mm-yy format
(eg for 23rd May 2008 press
) and
press the
soft key, you will hear a conrmation tone
7. Press the
button to return to standby.
Your BT Studio Plus 5100 is now ready for use.
Batteries and handset may become
warm during charging. This is normal.
If you have more than one handset
registered to your base, you only
need to set the date and time on one
handset and the other handsets will
be automatically updated.