• Enter the four digit base station code
(default = 0000). Enter this if the base station code
has not been changed.) The ———— marks disappear
one by one.
• Press the ✔ button. You hear a confirmation beep.
Display flashes LABEL = (this refers to the number
of the handset).
• Press the ✔ button to automatically allocate the next
handset number. Display briefly shows PLS WAIT then
the base station to which your handset is registered,
e.g. BASE 1, and finally shows the handset number you
have given it, e.g. HSET 2.
To de-register a handset
• Press the ➔ button until the display shows SET UP.
• Press the ✔ button. Display shows HANDSET.
• Press the ✔ button. Display shows KEYTONES.
• Press the ➔ button until the display shows REG.
• Press the ✔ button. Display shows ADD.
• Press the ➔ button until the display shows REMOVE.
• Press the ✔ button. Display shows PIN= ————.
• Enter the four digit base station code (default 0000).
Enter this if the base station code has not been
changed.) The ———— marks disappear one by one.
• Press the ✔ button. Display shows LABEL = X
(i.e. your handset number).
• Press the ✔ button. You will hear a beep, the display
will show e.g. HSET 2 followed by REG.
• Your handset is now de-registration.
10
If you are experiencing problems, please call the Synergy
Helpline on 0845 650 20 20.
Park No. is a unique number given to each individual base
station.