BT SYNERGY User Manual

49
Standard DECT/GAP
Number of channels 120 duplex channels
Radio frequency range 1880 MHz to 1900 MHz
Duplex method Time-division multiplexing. 10 ms
frame length
Channel spacing 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Voice coding 32 kbit/s
Transmitted power 10 mW, average output per channel
Range up to 300 metres outdoors (uninterrupted line
of sight) up to 50 metres in buildings
Power supply Charger 230 V/50 Hz (AC adaptor)
Power consumption charger 0.9 VA
Operating time, mobile unit (with fully charged
battery)
Standby: up to 60 hours Phone in use: Up to
6 hours
Permitted ambient conditions 0°C to 40°C
for operation (maximum) – 20% to 75% rel. humidity
Permitted storage temperature –10°C to +60°C
Signalling method DTMF
Signal key function Earth Recall/Timed Break Recall
Charger dimensions 100mm x 80mm x 60mm
(L x W x H)
Telephone unit dimensions 180mm x 60mm x 35mm
(L x W x H)
Weight Charger unit: 105g. Handset: 200g (with battery)
Technical
specification

BT SYNERGY Specifications

General

Talk time	10 hours
Standby time	100 hours
Caller ID	Yes
Answering Machine	No
Intercom	Yes
Handset Speakerphone	Yes
Range	300 meters
Expandability	Up to 4 handsets