38
• Follow the announcement instructions.
• Press the
TALK button to return to standby or replace
the handset on the base station.
Editing select service numbers
If the pre-programmed telephone numbers for ‘friends
and family’ or ‘call my bill’ change you can update them.
• Press the ➔ button until the display shows SET UP
• Press the ✔ button. Display shows HANDSET
• Press the ✔ button. Display shows KEYTONES
• Press the ➔ button until the display shows SERVICES
• Press the ✔ button. Display shows FRIENDS FAM
• Press the ➔ button to move between FRIENDS FAM and
CALL MY BILL
• When you are on the select service you wish to edit
press the ✔ button
• Display shows the telephone number stored.
• Press the ✔ button, you are now in the edit mode.
• Delete the number by pressing the ✗ button for as
many digits as you want to remove.
• Enter the new number for the Select Service followed
by ✔ button.
• Display shows STORED, beeps and then shows FRIENDS
FAM or CALL MY BILL.
• Press and hold the ✗ button to return to standby.
The display shows HSET 1