BT Vision - How Do I Connect Using an HDMI Cable?

12 Help
HowdoIconnectusinganHDMIcable?
You need a High Denition TV (HDTV) to connect using an HDMI cable
(not supplied). If you don’t have a cable already, you can buy one at
most electronics stores or go to www.shop.bt.com
Follow these steps:
1 Using your HDMI cable, connect the HDMI socket of your Vision+
box
™
to the HDMI socket of your TV
230V ~ 50Hz
25W
USB
LAN
TV
AUX
AUDIO OUT
S-VIDEO
SPDIF
HDMI
RF IN
RF OUT
AUDIO OU
S-VIDE
230V ~ 50Hz
25W
USB
LAN
TV
AUX
AUDIO OUT
S-VIDEO
SPDIF
HDMI
RF IN
RF OUT
1
2
2 make sure your HDTV’s audio visual (AV) channel is selected on
your TV. Some TVs will do this automatically
3 when your Vision+ box
™
has started, scroll to Settings, then select
TV Settings from the drop-down menu
4 select Screen Aspect Ratio
5 choose 720p or 1080i denition
6 click Save to start a test
7 when the test is complete, select Save Settings
IamexperiencingproblemsreceivingFreeviewchannelsandhave
poorpicturequality
If you are experiencing problems receiving Freeview channels and
have poor picture quality:
• check your TV aerial is externally mounted and is securely xed.
Windy conditions can affect your picture quality
• the weather can cause disruption to your picture quality,
causing pixelation and/or picture freezes. It may even cause
missing channels
• make sure you’re using good quality cables – these are vital to
ensure the signal from the aerial reaches your Vision+ box
™
with minimum picture loss and interference
• if your aerial is over 10 years old, you might want to consider
upgrading. To nd out more about upgrading your aerial, go
to www.uktsg.co.uk