BT Vision - Set-Up; Before You Start

Set-up 3
1 Before you start, check that your Hub is ready
BT Vision is a TV service that uses your broadband line, so please
check that your BT Home Hub is ready – its Broadband light should be
glowing steady blue, or green if it’s a Hub 1.0 or 1.5.
Then just follow the simple steps in this section. You’ll need about
30 minutes to set up BT Vision.
Important: do not turn on your Vision+ box
™
until step 7.
Set-up
Important: do not insert your Setanta Sports Viewing Card (if
ordered) until after step 8. To nd out more about using a Setanta
Sports Viewing Card, please see page 11.
AlsoorderedBTBroadband?
If you prefer, we can arrange for an engineer to set up your broadband
and/or BT Vision for a small cost.
Just call us on 0800 876 6542 or go to www.bt.com/homeitinstall