BT Vision - Check Your Box Contents; Decide Where You Want Your Vision+ Box

4 Set-up
3 Decide where you want your Vision+ box
™
You can put your BT Vision+ box
™
close to your BT Home Hub (see
Set-upA below), or in another room (see Set-upBon the next page).
However, the Vision+ box
™
needs to be:
• close to a mains power socket
• close to your TV or video recorder/DVD player (i.e. whichever
you’ll be connecting to)
2 Check your box contents
BT V i si o n
Se t -u p g u id e
www.bt.com/btvision
T u r n i t o n
Your guide to getting
the best out of BT Vision
V.2 028656
Available in Braille, large print
and audio CD. Please call FREE
on 0800 800 150 for your copy.
Set-up guide Turn it on guide Batteries
Power cable SCART cable Aerial cable
Vision+ box
™
Remote control
Ethernet cable Powerline adapters (x2) Ethernet cable
Youmaynotneedalltheseitems:
Find Handset
Reset to
Defaults
Wireless
Association
Restart
230V ~ 50Hz
25W
USB
LAN
TV
AUX
AUDIO OUT
S-VIDEO
SPDIF
HDMI
RF IN
RF OUT
Set-upA
Find Handset
Reset to
Defaults
Wireless
Association
Restart
230V ~ 50Hz
25W
USB
LAN
TV
AUX
AUDIO OUT
S-VIDEO
SPDIF
HDMI
RF IN
RF OUT
US
1
IfyourBTHomeHubisclosetoyourVision+box
™
You won’t need to use your Powerline adapters.
1 Using one of your Ethernet cables (yellow ends), connect one
end to the LAN socket at the back of your Vision+ box
™
2 Then connect the other end to your Hub’s Ethernet port 1.
Now go to step 4 on page 6
Find Handset
Reset to
Defaults
Wireless
Association
Restart
230V ~ 50Hz
25W
USB
LAN
TV
AUX
AUDIO OUT
S-VIDEO
SPDIF
HDMI
RF IN
RF OUT
US
2